Futaba G190 Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Urządzenia pomiarowe Futaba G190. Futaba G190 User Manual Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 2
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 0
No part of this manual may be
reproduced in any form without
prior permission.
The contents of this manual are
subject to change without prior
notice.
This manual has been carefully
written. Please write to Futaba if
you feel that any corrections or
clarifi cations should be made.
Before using your new gyro,
please read this manual thor-
oughly and use the gyro prop-
erly and safely. After reading
this manual, store it in a safe
place.
1M23N15502
Features of G190
Set Contents
The G190 comes with the following accessories:
Functions and Connections
Mini screwdriver
(for adjustments)
Double-sided tape
(3 sheets)
G190 Ratings:
(Integrated sensor type rate gyro)
Gyro sensor: piezoelectric sensor
Operating voltage: 4.8 to 6.0VDC
Current drain: 15mA at 4.8V
Operating temperature range: -5 to +45ºC
Dimensions: 22.2 x 22.8 x 8.9mm (except pro-
trusion)
Weight: 6.7g (including connector)
Functions: Sensitivity trimmer and LED monitor
Thank you for purchasing a G190 gyro, a rate gyro for small electric powered helicopters. G190 is a
small and light-weight gyro with high-performance, employing small size piezoelectric sensor of little
temperature drift. In addition, the G190 unit is well deigned as any side of its case can be used for easy
and stable mounting.
G190
LED monitor:
Quick Blinking: The LED continues blinking quickly as the initialization of the G190 au-
tomatically starts immediately after the power is turned on.
Always On: As soon as the initialization is completed, the LED turns on continuously
and G190 is ready for operation.
Slow Blinking (about 1Hz): If the G190 receives any abnormal signal from the receiver,
the LED starts slow blinking.
Small piezoelectric sensor
G190, utilizing a small piezoelectric sensor of little temperature drift, has achieved a very stable
performance.
Small, light-weight and all-in-one
Our high-density assembly technology has made it possible for G190 to become very small
(22.2x22.8x8.9mm, excluding protrutions) and light-weight (6.7g).
Newly designed case capable of using any side of the case for mounting
The newly designed case, any side of which can be used for mounting, is very small and highly
flexible for being correctly positioned and correctly oriented on the limited space of a small-size
electric powered helicopter. Consequently G190 can maximize its gyro performance.
Applicable to the micro servo S3108
Combination of G190 and S3108 micro servo would further reduce the total weight.
LED monitor
Special Markings;
Pay special attention to the
safety at the parts of this
manual that are indicated
by the following marks.
Symbol: ; Prohibited
; Mandatory
Mark Meaning
Procedures which may lead to a dangerous
condition and cause death or serious injury to
the user if not carried out properly.
Procedures which may lead to a dangerous
condition or cause death or serious injury to
the user if not carried out properly, or
procedures where the probability of superficial
injury or physical damage is high.
Procedures where the possibility of serious
injury to the user is small, but there is a
danger of injury, or physical damage, if not
carried out properly.
Rate Gyro for Small Electric
Powered Helicopters
INSTRUCTION MANUAL
INSTRUCTION MANUAL
Gyro sensitivity trimmer (GAIN)
Gyro sensitivity setting trimmer. Set to the
maximum value at which the tail does not hunt
(minute vibration).
Rudder servo connector
Connects the rudder servo.
Rudder input connector
Connects to the receiver rudder
channel output connector.
Rudder servo
Przeglądanie stron 0
1 2

Podsumowanie treści

Strona 1 - INSTRUCTION MANUAL

• No part of this manual may be reproduced in any form without prior permission. • The

Strona 2 - Precautions

Repair Service Before requesting repair, read this instruction manual again and recheck your system. Should the problem continue, request

Komentarze do niniejszej Instrukcji

Brak uwag