Futaba GY520 Instrukcja Użytkownika Pobierz pdf (Strona 16)

GY520 P

ROGRAMMING

Entering Programming Mode

Press and hold the button on the side of the GY520. After

3 seconds the LED indicator will momentarily change to violet.

Release the button and the gyro will begin ﬂ ashing once per

second. The color shown is the option selected for the 1st

parameter [Servo Type]. For example, if you see one Blue Flash

then the [Servo Type] is set to Digital 1520 S. If you see one

Red Flash then the [Servo Type] is set to Digital 760 S servo.

The number of ﬂ ashes is the parameter number you are viewing

and the color of the LED indicates the setting that has been

selected. Please see the GY520 Parameters and Settings Table.

Changing the setting within a parameter

To move to the next setting within a parameter, quickly (less

than one second) press and release the button on the gyro. The

LED will begin ﬂ ashing rapidly. This indicates that the gyro

needs conﬁ rmation of the change. While the LED is ﬂ ashing,

rapidly press and release the button again to confirm the

change. The confirmation request flash will last one second,

after this period of time the gyro will return to the parameter

menu without making a change. Always ensure that the change

has taken place by counting the number of ﬂ ashes and verify

the color of the indicator LED.

Moving to the next Parameter

Press and continue to hold the button on the side of the GY520.

After 2 seconds the LED indicator will momentarily change to

violet. Release the button and the gyro will move to the next

parameter. The number of ﬂ ashes will change to reﬂ ect this.

Button

Y520 Mnl.indd 16Y520 Mnl.indd 16 4/7/2009 7:55:04 AM4/7/2009 7:55:04 AM

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Brak uwag

Futaba GY520 Instrukcja Użytkownika Strona 16